Multiplying laburnum - 5 methods explained in detail

Multiplying laburnum - 5 methods explained in detail

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

The laburnum is one of the easy-care shrubs that can reproduce themselves. You can also increase your laburnum through targeted actions.

The laburnum is a frugal plant that requires little maintenance and knows how to impress with its abundant flowering. The propagation is also completely uncomplicated, with a little luck the plant can multiply even without our intervention. We are now going to tell you which possibilities of propagation are possible and what needs to be considered.

Increasing laburnum - possibilities

  1. even sowing
  2. seed
  3. finishing
  4. cuttings
  5. hardwood cuttings

1. Gold rain multiply by self-sowing

Proud owners of laburnum often don't have to worry about the plant multiplying. If the seeds are left on the plant, with a little luck, small plants will show up next spring. The hobby gardener need do nothing more than dig up the plantlets and put them back in the soil at the desired location.

" Tip: If you do not want the golden rain to multiply uncontrollably, you should remove all dead plant parts after flowering. This often has the positive side effect that a second bloom follows.

2. Golden rain multiply by seeds

If you already have a shower of gold, this type of propagation is child's play for you. Just leave a few panicles on the shrub after flowering. The seeds can be easily removed from the dried pods. Now you can put the seeds in a container filled with growing soil and cover them lightly with substrate. The planter is placed bright and warm. Normal room temperature is usually sufficient for germination. If you want to speed up the process, cover the planter with a cover made of film or glass.

" Tip: Covers should be aired briefly every day, otherwise there is a risk that the seeds will start to mold.

The seeds are kept evenly moist, but never drenched. After germination has taken place, the plantlets can grow to a height of about ten centimeters. They are then pricked off and the strongest specimens are further cultivated in separate planters.

If you do not have a laburnum, you can of course also buy the seeds.

3. Golden rain multiply through refinement

Refining plants is not for beginners. In tree nurseries, on the other hand, the method is often used to preserve certain species and to combine the beneficial properties of different plants. The method of refinement is preferred for fruit crops or roses and is also possible with gold rains.

When a plant is ennobled, the branches of a plant are attached to it. The plant properties can be preserved through the refinement. The person skilled in the art differentiates between different finishing methods. So the copulation is carried out with branches. In contrast, the buds are ennobled during the oculation. The use of this method is hardly worthwhile in the case of laburnum, since the plant can of course be propagated much more simply and uncomplicatedly.

4. Gold rain multiply through cuttings

On the other hand, the propagation of cuttings can also be carried out successfully by people who have less of a green thumb.

Multiplication of cuttings step by step

  1. Cut the cutting
  2. Prepare the cutting
  3. Plant cuttings
  4. Keep the cutting moist
  5. Wait for rooting

Cuttings can be cut from existing plants, preferably in early spring, before the start of the growing season. The cuttings are cut from the already woody annual wood. A cutting should have a length of about 15 centimeters.

The cuttings root in different ways. First, the branches in the lower area are cleared of leaves or buds. Otherwise there is a risk that the cutting will start to rot in water or soil. You can put the cuttings in a container with water or put the cuttings in planters filled with growing soil.

If the cuttings are placed in a water container, the water should be changed regularly. If the cuttings are placed in a planting pot filled with growing soil, this must also be watered regularly. However, waterlogging should be avoided. This would cause the cutting to rot. The cuttings are placed bright and warm in the room. Now a little patience is required.

As soon as new leaves appear, it can be assumed that root formation has also started and the propagation has been successful.

" Tip: Plants grown in the room should not move outdoors until next spring. The roots are not yet sufficiently developed to survive the winter outdoors.

5. Multiply laburnum by sticking sticks

At first glance, cuttings do not differ significantly from sticks, but you do it differently. A cutting has leaves and buds and is therefore cut during the growing season of the plants. The plywood, on the other hand, is a completely woody and completely bare branch, which is cut in winter, i.e. during the resting phase of the plants.

" Tip: Sticks can be obtained from the annual pruning of the plants.

A stick should be cut from a healthy and strong shoot. This gives the chances of successful propagation. Sticks can be cut twenty centimeters or longer. Shoot tips are not used. The wood is not sufficiently wooded there. So it is better to cut the plywood out of the middle of a branch.

" Tip: The plywood should have several leaf nodes.

The leaf nodes are important, because these small balls later develop the roots and shoots. In mild areas, the sticks can be put directly into the garden floor after cutting.

Play it safe if you proceed in a similar way to that described for the cuttings. Put the sticks in plant pots and place the planters in a warm location in the house. Root formation begins more quickly at the warm stand. The small plants develop quite well until spring and can be planted outdoors after the last night frosts - at the end of May.

The multiplication of stickwood - step by step

  1. Cut sticks
  2. Put the sticks in the ground
  3. Place the plant pot in the room
  4. Wait for rooting
  5. Plant cuttings in spring

Propagation methods: advantages and disadvantages

Type of propagationadvantageseven sowing
even sowing✓ Self-sowing takes place completely without your intervention.
✓ In the spring, the plantlets can be planted directly in their new location.
✓ The method is completely straightforward.
✗ A plant must already exist.
✗ Don't forget to leave a few panicles of flowers on the plant.
✗ Self-sowing is uncontrolled.
Stecklingsvermehrung✓ It is a simple and straightforward method.
✓ Even horticultural laymen get along well with it.
✓ The chances of success are high.
✗ You need a well-developed plant.
✗ Rooting takes some time.
Steckholz proliferation✓ Sticks are a waste product when pruning.
✓ It is a simple method with good chances of success.
✗ A plant must be present.
✗ Rooting takes some time.
seed✓ Several plants can be grown in a simple way.
✓ Seeds can easily be obtained from existing plants.
✗ Seeds must be purchased if there is no plant.
✗ Patience is required with this method.


  1. Martinez

    Bravo, you were visited with simply brilliant idea

  2. Mitchel

    True phrase

  3. Arvie

    And what can I say then?

  4. Wyligby

    cool! Neighing a lot :)

  5. Poston

    Klass ... horse in gas maskeeeeeeeeeeeee

  6. Maldue

    Of course, I apologize, but this answer does not suit me. Who else can suggest?

Write a message